GE JVM140 Microwave Oven User Manual


 
Your Touch Control
Wnel
The Touch Control Panel allows you to set the oven
controls electronically with the touch of a finger.
It’s
designed to be easy to use and understand.
When You Plug in the Oven
The display panel displays five 8’s, 18 POWER and all of
the oven functions. After 15 seconds, all lights disappear
and “RESET” appears in the upper portion. Touch the
CLEAR/OFF pad, set the CLOCK and oven is ready
for use.
If power is disrupted at any time, the above sequence
recurs, and you must reset CLOCK after touching the
CLEAR/OFF pad.
“PRObE” Appears on the Display
Probe has been forgotten when Auto Roast or
Temp
Cook/Hold function is being used.
Probe is not securely seated in oven wall receptacle.
1. DISPLAY.
Displays time of day, time or temperature
during cooking functions, power level being used,
cooking mode and instructions.
2. TIME COOK I & II. Microwave for a preset amount
of time using automatic power level 10. (If desired, you
may change power level after entering cooking time. See
page 10.)
3. TIME DEFROST.
Gentle thawing at automatic power
level 3 (Low). (If desired, you may change power level
after entering defrosting time. See page 9.)
4.
CLOCK.
Touch this pad to enter time of day or check
time of day while microwaving. To set clock, first touch
CLOCK pad and then enter time of day. For example, if
time is
1:30,
touch number pads 1, 3 and O and
“1:30”
will appear in display. Then touch START pad. To reset
or change time, simply repeat above process.
5. AUTO START.
Allows you to program your oven to
begin cooking at a preset time of day—up to a 12-hour
delay. (See page 11.)
&
CLEAR/OFF.
When touched, it shuts off the oven
and erases all settings (except time of day).
7.
AUTO ROAST.
Insert probe, touch this pad and then
number pad for desired code number to slow-cook or
temperature cook meat with automatic preset program.
(See pages 12 and 13.)
8. EXHAUST FAN. Press HI, LO or OFF for the
different fan speeds.
9. TEMP COOK/HOLD. Use the temperature probe to
cook by using a preset temperature. Once food reaches
preset temperature, oven switches to HOLD setting and
maintains that temperature until you touch the
CLEAR/OFF pad. (See page 11.)
10. MIN/SEC TIMER.
This feature uses no microwave
energy. It functions as either a kitchen timer, as a holding
period after defrost or as a delay timer before time or
temperature cooking. (See page 18.)
U. MIN. Use with number pads to enter whole minutes.
For example, for 4 minutes touch 4 and MIN.
U.
POWER LEVEL.
Touch this pad before entering
another power level number if you want to change from
automatic power level 10 (High) for cooking or power
level 3 (Low) for defrosting.
U.
NUMBER PADS.
Touch these pads to enter cooking
time, defrosting time, time of day, temperature, power
level, Auto Codes or food weights for Auto Defrost.
14. START.
After all selections are made, touch this pad
to start the oven.
15.
AUTO DEFROST.
Touch this pad and food weight.
The oven automatically sets power levels and defrosting
time. (See page 14.)
16.
LIGHT.
Touch desired pad to illuminate counter or
to turn on night light.
AUTOMATIC
FN
FEAT~
Cooking appliances installed under the oven may,
under some heavy usage conditions, cause temperatures
high enough to overheat some internal parts of the
microwave oven.
To prevent overheating from taking place, the exhaust
fan is designed to automatically turn on at a low speed if
excessive temperatures occur. Should this happen, the fan
can not be manually turned off, but it will automatically
turn off when the internal parts have cooled. The fan may
stay on up to approximately 30 minutes after the range
and microwave oven controls have been turned off.
6