Filter
Top Products
How to Use the Minute/Second
~mer
The MIN/SEC TIMER has three
timing functions:
. It operates as a minute timer.
. It can be set to delay cooking.
● It can be used as a hold setting
after defrosting.
The MIN/SEC TIMER operates
without microwave energy.
How to
~me
a 3-Minute
Phone Call
1. Touch MIN/SEC TIMER pad.
The display shows “: O“
and
“ENTER TIME” flashes.
2. Touch number pads 3 and MIN
(for 3 minutes and no seconds).
Display shows
“3:00”
and “TIME?’
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes
“End:’ and display shows
time of day.
Using a Holding
~me
The Minute/Second Timer can also
be
usd
to program a “holding time”
between microwave cooking functions
The time can range from one second
to 99 minutes and 99 seconds. A
holding or standing time maybe
found in some of your own recipes
or in the cookbook supplied.
Programming Delayed
Cooking
To delay cooking up to 99 minutes
and 99 seconds, touch either TIME
COOK I & II,
TEMP COOK/
HOLD or AUTO ROAST and enter
cook time, temperature or code.
Touch MIN/SEC TIMER and enter
number of minutes to delay cooking.
When delaying
Temp
Cook/Hold
or Auto Roast cooking, be sure
probe is in food. Touch
START.
Timer will count down to zero and
cooking will begin.
How to Defrost, Hold and
~me
Cook
Let’s say you want to defrost a frozen
casserole for 15 minutes, hold for
10 minutes and then Time Cook for
25 minutes. Here’s how to do it:
Step 1:
Take casserole from freezer
and place in oven.
Step 2: Touch TIME DEFROST.
The display shows “: O“ and
“POWER
3?’
“ENTER DEF
TIME” flashes.
Step 3: Touch pads 1,5, and MIN
for 15 minutes defrosting time.
“15:00”
appears on display.
(Defrosting is automatically set on
power level 3 but can be changed
by touching the POWER LEVEL
pad and the desired power level.)
Step 4: Set standing or hold time
by touching MIN/SEC TIMER.
The display shows “: O“ and
“ENTER TIME” flashes.
Step 5: Touch 1,0 and MIN to hold
for ten minutes.
“10:00”
appears
on display and “TIME” flashes.
Step 6: Touch TIME COOK I & II
pad. The display shows “: O“ and
“POWER
10?’
“ENTER COOK
TIME I“ flashes.
Step 7: Touch 2,5 and MIN
for twenty-five minutes of cooking
time. “COOK TIME” flashes and
“25:00” and “POWER 10” appear
on display.
Step 8: Touch
START. “DEF
T~E”
and
“15:00”
counting down show
on display. As each function is
automatically performed, oven
display shows instructions entered
and the function.
Step 9:
When time is up, the oven
signals and flashes
“End~’
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven will automatically
rearrange
your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q.
Can I defrost and hold only?
A. Yes.
Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in defrost and amount of
time. Then program the hold time
and the amount of cooking time. Be
sure to put the thawed dish in the
refrigerator promptly.
NOTE: Let foods remain at room
temperature only as long as safe.
Times will vary.
Q. I programmed my oven for
a specific defrosting time but it
defrosted longer than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. You may have set the
oven to defrost for 4 minutes, hold
for 2 minutes, and then defrost for
6 minutes. In this case, the oven
would defrost for 6 minutes and
hold for 2 minutes.
18