Filter
Top Products
4
Standard
Appearance
Panel
Options
The Monogram compactor models ZCG3300
and ZCG3100 come with a white/black reversible
aluminum front drawer panel. Model ZCG3300 is
shipped with the white panel showing and model
ZCG3100 with the black side showing. The panels
on both models can be reversed to reveal the opposite
color side. The ZCG3500 comes with a stainless steel
wrapped panel.
Go to Step 7, page 12. Follow procedure A for
reversing door panel color if desired.
Monogram compactor models ZCG3300 and ZCG3100
are designed to accept a custom front drawer panel to
match the surrounding cabinetry.
You can:
• Install a 1/4" thick custom panel
• 3/4" thick custom panel
• 3/4" thick custom panel and custom handle
1/4" Thick Wood Panel
Go to Step 7, page 12. Follow procedure B for
installation.
• Cut panel 11-11/16" wide, 24-1/2" high.
The custom 1/4" thick panel replaces the
white/black aluminum panels and cardboard filler.
The custom panel will slide into the trim on the
drawer front, concealing raw cut edges.
3/4" Thick Wood Panel
• Cut panel 12" wide x 24-3/4" high.
The custom 3/4" thick panel replaces the
white/black aluminum panel. Cut edges will be
seen and must be finished for best appearance.
Both the trim and drawer front panel will be
removed to make this installation.
Note: 3/4" thick door panels, both raised and flat design,
should be constructed in the same manner as typical cabinet
doors. Order the 3/4" custom door panel from the cabinet
manufacturer. Be sure to provide the exact dimensions so
that the panel is constructed accurately.
Go to Step 7, page 12. Follow procedure C for
installation.
Installation Preparation
Built-In Compactors
Custom
Panels
Option #1
Option #2