6
Tools required:
•#2 Phillips head screwdriver
• Flat blade screwdriver
•Tape measure
•Spirit level
•10" long 2x4
•Adjustable wrench or slip
joint pliers
•Drill and 1/8" drill bit
Parts List:
•4 leveling feet caps
•4 Phillips head screws
• 2 Slotted head screws
•2 Tip-over brackets
•2 90° clips
Optional Materials
(not supplied):
•Custom front panel
• Custom handle
•Custom toekick board
•5 wood screws
Installation
Built-In Compactors
Technical
data
Electric Power—120V, 60 HZ, 5 amp
Circuit Requirement—15 or 20 amp grounded outlet
Motor Horsepower—1/3
Compacting Force—5000# max.
Container volume—1.4 cu. ft.
Weight—135 lbs.
Cycle Time—70 sec. max., 12 sec. min.
Choosing
the
location
This compactor is designed as a built-in appliance
only. It may be located in any convenient space under
a countertop. DO NOT OPERATE FREE-STANDING
because the compactor will tip over when the drawer
is pulled out.