GE Monogram ZIF36N RH Refrigerator User Manual


 
13
Remove outer carton.
Carefully cut banding at the top and bottom.
Slide out back corner posts (2).
Slide carton off top of cabinet.
NOTE: IT IS NOT NECESSARY TO LAY CABINET DOWN
IN ORDER TO REMOVE SKID!
The unit is secured to the skid with 4 slotted tie-down
straps. First remove the 5/16" bolts from the base
channels in the tie-downs, then remove the 7/16" bolts
securing the straps to the skid.
Protect the flooring. Cut a large piece of the cardboard
carton and place under the product.
Support blocks on the bottom must be removed before
the refrigerator is taken off the skid or damage will
occur. Remove support blocks by carefully tilting
cabinet to side and sliding out.
Step 1
Remove
Packaging
CAUTION
Refrigerator and freezer is much heavier at the top
than at the bottom be careful when moving. When
using a hand truck, handle from side only.
PRUDENCE
Le réfrigérateur est beaucoup plus lourd en
haut qu'en bas. Il faut être prudent lors des
déplacements. Si un diable est utilisé, il faut
soulever le réfrigérateur sur le côté seulement.
CAUTION
DO NOT ATTEMPT TO ROLL UNIT OFF SKID.
PRUDENCE
IL NE FAUT PAS ESSAYER DE FAIRE ROULER LE
RÉFRIGÉRATEUR POUR L'ENLEVER DE LAY PALETTE.
7/16" Bolt
Lift the refrigerator off the skid with an appliance dolly.
Handle from the sides.
Installation
36" Refrigerators, Freezers