GE Monogram ZIF36N RH Refrigerator User Manual


 
38
Step 7
Install
Grille Base
Cover
Open doors fully.
Install the double width grille base cover by
slipping the notched ends over the hinges.
Place wire fence over the grill base cover (textured
side out). Drive original wire fence screws through the
fence, the grille base cover and into the frame.
Step 8
Remove
Grille Frame
Back out 2 screws on each side of the top case trim.
The top piece is secured to the unit with a rubber dust
gasket. Roll the trim upwards to access and remove
end screws as shown. Remove and discard inside
pieces.
Slide assembly out of the rubber gasket.
Unified Base Cover
Place
Trim Over
Hinges
Install
3 Screws
Install
3 Screws
Remove
Screws
Remove
Screws
Remove
Screws
Dust
Gasket
ZUG75 Trim Kit
Unified 3/4" Custom Grille Panel Kit