GE Monogram ZIF36N RH Refrigerator User Manual


 
22
Right hand door swing models are illustrated in these
instructions. Follow these instructions for left hand
models.
Tools and materials
required:
#2 Phillips screwdriver
Drill and appropriate
bits
Custom door panels
Putty knife
Safety glasses
7/16" wrench
Parts List
A. Top trim
B. Handle side trim
C. Hinge side trim
D Bottom trim
E. Support bracket for
custom panel
F. 4-3/8" screws for
support brackets
(20)
G. Grille support panel
and screws (6)
H. Wood screws #6
1/2" flat head
screws (30)
NOTE: If you are using a custom handle, see ZKHTR1
installation instructions. For a tubular stainless steel
handle, see ZKHTRSS1 installation instructions.
Kit Contents
This kit provides for the installation of 3/4" thick custom
door and grille panels. Handles are included and must
replace the supplied handles.
Step 1
Remove
handles
and trim
Open door to 90°.
Remove the Phillips head screws from the full length
handle, remove and discard handle. Retain screws.
Open the door fully to stop.
NOTE: Removal of actuator arm allows the door to
be opened wider, giving greater access to hinge
side trim.
Remove the screws from the aluminum trim, top
bottom and hinge side.
Retain screws. Discard original trim and handle.
A
B
C
D
E
F
G
H
ZKTR36LH/ZKTR36RH Trim Kit
3/4" Custom Panels