GE Monogram ZIF36N RH Refrigerator User Manual


 
20
Tools and materials required:
#2 Phillips screwdriver
Drill and appropriate bits
Custom door panel
Custom Handle
Safety glasses
Parts List:
A. Handle side door extrusion (for left hand models)
B. Handle side door extrusion (for right hand models)
This kit provides the necessary framework to install a
custom handle, of your choice, onto a 1/4" thick custom
panel. (Handles not included.) The extrusions in this kit
allow the custom handle to be secured to the door
structure, rather than the door panel.
Select the extrusion for your model, discard other
extrusion.
Step 1
Remove
handle
Right hand door swing models are illustrated in these
instructions. Follow these instructions for left hand
models.
Open door to 90°. Remove the screws from the full
length aluminum handle.
Retain screws. Discard handle.
ZKHR1 Trim Kit (For 1/4" Panels)
Support for Custom Handles