4
How to Chop in Bowl
1. Hold Extender Shaft with one hand.
Using the
other hand,
place your
thumb and
forefinger
between tabs
on S-Blade
and push to
lock.
2. Place Food Gate Insert into the
Continuous
Feed Chute.
This blocks
any food
from going
through the
Continuous
Feed Chute.
3. Put food in Bowl. Place the Cover on
the Bowl and
turn the
Cover clock-
wise to lock.
Place Food
Pusher into
Food Chute
while chop-
ping.
4. When finished, turn off and unplug
unit. Hold
Extender
Shaft with
one hand.
Using the
other hand,
place your
thumb and
forefinger
between the
tabs on S-Blade and push to unlock.
NOTE: Use caution. The disc is
slippery after use.
Controls
The High Speed button is a continuous
ON button that will run until it is pushed
again to turn OFF.
The Low Speed button operates in a
pulse mode that will run only while the
button is held down.
840098500 Ev00.qxd 3/8/02 11:50 AM Page 4