Filter
Top Products
9
Electrical Installation
Male Receptacle Female end of cord
Main power hook-up (Figure 2)
Exhaust Hood Electrical Connection
Female Receptacle Male end of Closet Power Cord
Closet power hook-up (Figure 3)
Exhaust Hood
After your exhaust hood has been installed the very last thing to do is to connect the special plug to the
range. The female receptacle for the exhaust hood is located at the rear of the stove by the main power
(male) receptacle (See Page 8 for receptacle locations and Figure 3 for receptacle illustration). Simply
plug the closet power cord into the receptacle, be sure to test all functions of the closet.
THE MODEL 7200/9200 GAS RANGE MUST BE ELECTRICALLY GROUNDED IN COMPLIANCE WITH LOCAL CODES
AND IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL ELECTRICAL CODE ANSI/NFPA 70 “LATEST
EDITION” IN THE U.S. OR THE CANADIAN ELECTRICAL CODE, PART I, CSA STANDARD C22.1 IN CANADA or YOUR
NATIONAL ELECTRICAL CODE.
Connect the female end of the power cord to the main power (male) receptacle at the rear of the stove. See Page 8 for
receptacle locations and Figure 2 for receptacle illustration.
This range must be plugged into a properly grounded/earth receptacle. The grounding/earth prong must not be removed
from the plug. DISCONNECT THE ELECTRICAL SUPPLY BEFORE SERVICING THE APPLIANCE.
The receptacle to be used for this appliance must be wired to STANDARD WIRING PRACTICES.
Your range is equipped with a two speed range hood that may be either vented directly to the outside,
or may be installed ventless. An exhaust filter is included with your hood. Filters should be cleaned
periodically in soapy water. Extras are available from your dealer or directly from AGA Marvel. Please
order 4 or more filters at one time to save freight and handling charges. Phone your dealer for pricing
and ordering instructions.