Hobart HBA1E Convection Oven User Manual


 
– 19 –
Setup Guide (cont)
Setup
Number Setup Item Display
P14 Steam Timer Mode The STEAM TIMER can be set up to display in seconds or
operate in food service mode. Select 0 for seconds or
300 to 990 for food service mode.
P15 Interior Light Brightness This value is the brightness of the interior lights. The higher
the number, the brighter the lights. Range is 50 to 100.
P16 Clock Operation This selects either 12 hours (AM/PM) or 24 hours real time
display. Press the Bake Time Up button to switch between
the two types of display.
P17 Temperature Setback Time This selects the elapsed time from the last timed bake to
when the oven will lower the oven set temperature to the
value set in P18. Range is 10 to 180 minutes.
P18 Setback Temperature This selects the oven set temperature that the oven will
change to when the temperature setback time has been
exceeded in P17. Range is 50°F to 300°F (10°C to
149°C).
P19 Lights Mode Select 1 for lights on continuously (when oven is on) or
select 0 for automatic operation. Lights will turn off
automatically after 30 minutes of no user activity (door
opened or closed, no buttons pushed).
SHUTDOWN
NOTE: Before restarting a gas oven, power switch and gas burner valve must be off for a minimum
of 5 minutes.
1. Remove all remaining product.
NOTE: Vent can be used to cool the oven.
2. Press the POWER ON OFF button.
3. Clean the baking chamber. (See Cleaning.)
4. For lengthy shutdowns, disconnect the main power and shut off the gas and water supply.
RESTARTING OVEN
NOTE: Before restarting a gas oven, power switch and gas burner valve must be off for a minimum
of 5 minutes.
1. Press the POWER ON OFF button to turn the oven on.
2. Press the UP or DOWN arrows next to the SET TEMP window to enter the desired temperature.