Filter
Top Products
– 26 –
Inspect Air Louvers
1. Check air louvers (shutters) (Fig. 9) inside oven and tighten any loose screws.
2. Check oven interior, tighten or replace loose or missing panel screws. Also check floor anchors.
Inspect Cavity Vent
1. Check cavity vent for proper operation.
A. Push VENT (Fig. 10) button on control panel to open vent and then push again to close
vent.
B. Visually check that vent opens (Fig. 11) and closes (Fig. 12) when button is pressed.
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Visually Inspect Electrical Connections
1. Inspect all wiring connections for discoloration. If discoloration is visible, contact your local Hobart
Bakery Systems service.