– 18 –
COOK AND HOLD OPERATION
Cook and Hold cooks the product in two stages. During First Stage Cooking, the oven temperature is
regulated by the Cook thermostat for the amount of time set on the Cook Timer. After the lapsed time
counts down to 00:00, Second Stage Cooking begins. During Second Stage Cooking, the burners are
off as the temperature in the oven declines to the Hold Temperature. The doors should remain closed
during Second Stage Cooking.
When the Hold temperature is reached, cooking is done. The Time Display counts up the Hold time
and flashes "Hold." Temperature in the oven will be maintained at the Hold temperature until the oven
is turned off.
400ºF
300ºF
200ºF
100ºF
COOK AND HOLD DIAGRAM - Time vs. Temperature
SHORT BEEP.
TIMER DISPLAY FLASHES 00:00.
COOK THERMOSTAT OFF.
BURNERS OFF UNTIL HOLD
TEMPERATURE IS REACHED.
LONG BEEP (20 SEC.)
BURNERS MAINTAIN
HOLD TEMPERATURE.
TIMER DISPLAY COUNTS UP
HOLD TIME AND FLASHES
"HOLD."
OVEN TEMPERATURE
TIMER DISPLAY COUNTS DOWN,
COLON FLASHES.
COOKING FROM
STORED HEAT
LOAD PRODUCT
INTO OVEN
PRODUCT TEMPERATURE
TEMP.
TIME
PREHEAT FIRST STAGE COOKING SECOND STAGE
COOKING
(DO NOT OPEN
DOORS)
HOLDING
PL-51608