Filter
Top Products
– 5 –
CONNECT GAS
LINE STRAIN
RELIEF HERE
PL-51216
LEVELING
Ensure that the oven racks are level in the final installed position.
INSTALLATION CODES AND STANDARDS
Hobart ovens must be installed in accordance with:
In the United States
1. State and local codes.
2. National Fuel Gas Code ANSI-Z223.1 (latest edition), available from American Gas Association,
1515 Wilson Boulevard, Arlington, VA 22209.
3. ANSI/NFPA 96, "Vapor Removal from Cooking Equipment" (latest edition), available from National
Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
4. National Electrical Code, ANSI/NFPA-70 (latest edition).
In Canada
1. Local codes.
2. CAN/CGA-B149.1, "Natural Gas Installation Code" (latest edition).
3. CAN/CGA-B149.2, "Propane Installation Code" (latest edition) available from the Canadian Gas
Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W 1R3.
4. Canadian Electrical Code, CSA Standard C22.2 No. 3 (latest edition).
INSTALLING BASIC OVEN
The basic oven must be installed on legs or be mounted on a modular stand. Installations on concrete
bases or other supports restricting air circulation underneath the oven is not advisable and may void
the warranty.
NOTICE: When the oven is mounted on casters, it must be installed with the casters supplied, a
connector (not supplied by Vulcan-Hart) complying with either ANSI Z21.69 (latest edition) or
CAN/CGA-6.16 (latest edition), and a quick-disconnect device complying with either ANSI Z21.41
(latest edition) or CAN1-6.9 (latest edition). It must also be installed with restraining means to guard
against transmission of strain to the connector, as specified in the appliance manufacturer’s instructions.
Attach the restraining device at the rear of the oven (Fig. 1).
Fig. 1