Filter
Top Products
– 11 –
of the processing cycle. The temperature display will show the actual cavity temperature until the
temperature reaches the setpoint, then it will display the programmed temperature.
Displaying Time/Temperature During a Processing Cycle
If you press during a processing cycle, the probe icon under the temperature display will light
and the probe temperature will be displayed for 5 to 8 seconds. You may press it again if you like.
Press to display both Cook temperature and time programmed for the Menu Button you're using.
Press to display both Grill temperature and time programmed for the Menu Button you're using.
Press to display programmed temperature only.
Press to display programmed time only.
Interrupting a Processing Cycle
If you want to check the food before the end of the processing cycle, press . This will turn off
the heaters, the front lamp and the rotor. will flash.
Press again to start the cycle from where it left off.
Press to start all over at the beginning of the programmed cycle.
End of Processing Cycle
At the end of a Cook or Grill cycle, a buzzer will sound. Press to silence the buzzer.
When the oven goes into the Warm/Hold cycle, the buzzer will sound, and the front lamp will cycle
on and off with the heaters. Press to silence the buzzer. The temperature and time displays
will show actual oven cavity temperature and time of day until reaching the holding temperature.
Press to end the holding process.
Changing a Programmed Setting
You may modify the temperature or time of a Cook or Grill function only on any Menu Button prior
to starting processing, or during processing. Press (for temperature) or (for time) while
at the same time pressing or . This will not change the temperature or time programmed
in the memory for that Menu Button.
Turning the Buzzer Off
Press .
Setting the End Time (Delayed Start)
Assume the roasting time is one hour and fifteen minutes and it is currently 2 o'clock. If you want
to finish roasting at 4:00, program as follows:
Press and hold while pressing or to adjust the time to 4:00. The colon in the display
will flash. The time display will show the cooking time.
Press . Cooking will begin at 2:45. Colon starts flashing.
Roasting stops at 4:00; buzzer sounds. Press to silence.
START
STOP
START
STOP
START
STOP
START
STOP