Hobart HRO550P Oven User Manual


 
– 7 –
AUTOMATIC CONTROLS (Fig. 4)
Automatic Controls can regulate the roasting temperature, stop cooking at a preset time, or allow
the buzzer to be timed. The last entered Temperature and Roasting Time is always retained in
memory by the Automatic Controls. Set the Temperature and Roasting Time, then press ON to
begin.
Setting the Temperature
DISPLAY TEMP
Press 325 Displays the thermostat setting (150 - 450°F).
Press + 326 Increases the temperature setting.
Press + 324 Decreases the temperature setting.
Setting the Roasting Time
DISPLAY TIME
Press 1:15 Displays the automatic roasting time.
Press + 1:16 Increases the automatic roasting time.
Press + 1:14 Decreases the automatic roasting time.
Press ON to begin.
Setting an Early Warning Buzzer
Assume the roasting time is one hour and fifteen minutes and it is currently 2 o’clock. The cycle
completes and the buzzer will sound at 3:15. If you want an early warning buzzer for basting or
whatever reason, program as follows:
DISPLAY TIME
Press 3:15 Displays the sum of the current time plus the roasting time.
Press + 3:00 Buzzer will sound at 3:00.
Press ON. Roasting begins.
At 3:00, the interim buzzer sounds. Press to silence.
At 3:15, roasting stops and buzzer sounds again. Press to silence.
Setting the End Time (Delayed Start)
Assume the roasting time is one hour and fifteen minutes and it is currently 2 o’clock. If you want
to finish roasting at 4:00, program the Automatic Control as follows:
DISPLAY TIME
Press 3:15 Displays the sum of the current time plus the roasting time.
Press + 4:00 Roasting will stop at 4:00.
Press ON. The red light on the ON button is lit. Rotisserie stays off until:
Roasting begins at 2:45. Colon starts flashing.
Roasting stops at 4:00; buzzer sounds. Press to silence.
Fig. 4