Filter
Top Products
– 12 –
WIRE CAGE ASSEMBLY (Built After July, 2004) (Fig. 4)
The Wire Cage assembly can be rotated out of the way to add ingredients or to access
the bowl and agitator. Some ingredients, such as liquids or powders, may be added
through the Wire Cage assembly while the mixer is in operation. An ingredient chute
accessory is available to assist in adding ingredients. Contact your local Hobart Sales
representative for more information.
Note how the grooves on the nylon retainer shoes allow the Wire Cage to ride around
the Circular Ridge of the Planetary Drip Cup.
• To open the Wire Cage assembly, rotate it to your left.
• To close the Wire Cage assembly, rotate it to your right until it stops in the Front-
Center Position.
NOTE: The Wire Cage assembly must be returned to the Front-Center Position for the
mixer to operate.
Fig. 4