– 15 –
PROGRAMMED COOKING
In programmed mode, preprogrammed recipes stored in long-term memory are used. Controller
cycles top burners on and off. When cooking partial loads or when cooking special glazes, cook with
one burner on or with a lower Cook Temp setting.
• Controller displays rdy .
• Press . The last operated program displays, for example: r01 .
• Press the up or down keys until the desired recipe number is displayed, for example: r03 .
• To start the selected cooking process, press .
• The display alternates between the program in use, the selected program's Cook Temp setting
and the remaining Cook Time preceded by a c, for example: r03 575
° c1:30 . The c in the
display indicates that the cook cycle has started and the timer has begun to count down.
• Press the Temperature switch on (Fig. 30).
• Turn Top Front and Top Rear Burner switches on.
• Check the burners in the top of the cavity (Fig. 31)
to ensure burners are lit and beginning to glow red.
• If one or both top burners do not ignite, turn burner
switch(es) off and on again.
HOLDING
• When the selected recipe's cook time expires and controller beeps, press .
NOTE: Pressing the button when in Hold Mode returns oven to cook cycle for an additional
5 minutes.
• The display alternates between the Hold Temp setting and the elapsed Hold Time preceded by
an h, for example: 200
° h0:01 . The h indicates that the Hold cycle has started.
• To stop a Hold cycle, press and hold .
• Controller displays rdy .
READ
START
STOP
PL-41711-1
TOP BURNERS GLOW RED
Fig. 30
Fig. 31
HOLD
TEMP
START
STOP
COOK
TIME
Motor Lights Temperature
Burners
Show Top Front Top Rear
HOBART
Temperature - Time Controller
COOK COOK
TEMP TIME
READ
HOLD START
TEMP STOP
SAVE
rdy