Filter
Top Products
– 7 –
Fig. 6
LEVELING
If the rotisserie oven is equipped with casters (standard), move
the rotisserie oven to its final installed position and lock the front
casters; back casters are nonlocking. Casters are nonadjustable;
therefore, the floor must be level to avoid experiencing cooking
problems.
If the rotisserie oven is equipped with adjustable feet (optional),
move the rotisserie oven to its final installed position. Place a
spirit level on top of the rotisserie oven and turn the adjustable feet
in or out to level the rotisserie oven front to back and side to side.
TETHER CONNECTION
When equipped with casters, the gas connection must be made
with a connector that complies with the Standard for Connectors
for Movable Gas Appliances, ANSI Z21.69 (latest edition) or
Connectors for Moveable Gas Appliances, (CAN/CGA-6.16) and
must be made with a quick-disconnect device that complies with
the Standard for Quick-Disconnect Devices for Use With Gas
Fuel, ANSI Z21.41 (latest edition) or Quick-Disconnect Devices
for Use With Gas Fuel (CANI-6.9). Tether the rotisserie oven
using the hole provided on the left side of machine next to the gas
connection (Fig. 6).
If disconnection of the tether is necessary, turn off the gas and
water supplies before disconnecting. After returning the rotisserie
oven to its original position, reconnect the tether before turning the
gas and water supplies back on.
PLUMBING CONNECTION
WARNING: PLUMBING CONNECTIONS MUST COMPLY WITH
APPLICABLE SANITARY, SAFETY AND PLUMBING CODES.
Water Supply Connection (Fig. 7)
The rotisserie oven is equipped with a water bath system in the
bottom of the rotisserie oven. It can be connected to the potable
water supply at the
1
/2" NPT (1.3 cm) supply valve connection. A
flexible connection is recommended to allow for rotisserie oven
movement.
Drain Connection (Fig 8)
For optional permanent connection, a 1
1
/2" NPT (3.8 cm) drain
connection is also provided. If connecting to a drain, make sure
the drain is connected to a grease trap.
PL-41656-1
HOLE
FOR
TETHER
PL-41690-1
WATER
VALVE
PL-41655-1
DRAIN CONNECTION
Fig. 7
Fig. 8