Hotpoint RGB628G Range User Manual


 
3;” 1/21/open-end wrench
~ Tm]n open-end or socket wrench,
I
or adjustable wrench
~ Flat blade screwd~iver (small)
M PR&PmEMH6E FOR COHWERS!OH
(1)Twn offgas supp~at tieWall.
(2) Ttwnofftieelectiealpowerto tie rmge.
Ifrange has not yet been connectedto gas supply,
or ifflexibleconnectionwas made,range maybe
pulled outhorn the -wallto make conversioneasier.
~ 1. For models equipped with sealed burners,
+-
remove the storage drawer,broiler drawer or kick
~ panel and locate he pressure regulator at rear of
~
the range.
Y
\ fi$.
)
Remove Screws
Access Cover
aj%~-J
On some models, you may have to remove an
access cover also.
For models equipped with dual burners, remove
the cooktop and locate the pressure regulator at
right rear of range.
~. Followl-hedirections in box m, E or
that match your regulator type.
Ifit is this regulator:
1. Use a cointo removethe capfrom the
pressure regulator.
2. Turn the cap overand hook it intothe slots.
The type ofgas to be used should nowbe visible
on the top ofthe cap.
Note:On some models the shut-offvalve
maybe in a different location.
this protective cap’
Cap Assembly
except for conversion
Ifit is this regulator:
1. Unscrew the plastic-protectedhex-nutcap
assembly from the top center of the regulator.
~. Carefullypry the protective plasticcap offthe
threaded metal cap. Gentlypullthe plasticwasher
offthe other threads.
~. Replacethe plastic cap onto the threaded end
displayingthe gas type you desire. Press the
plasticwasher onto the remaining threads.
~. Reinsert the cap assembly into the regulator.
Do not overtighten, but make s~~rethe washer is
seated securely.
-.
‘.
. .
“.,
. .. . . ——
—...
......——-..