Filter
Top Products
9
Operating Your Mixer
1. Make sure the touch wheel control is SET TO “OFF”
and the mixer is unplugged.
2. Press the mixer head release button and LIFT MIXER
HEAD UP.
3. INSERT AN ATTACHMENT.
4. LOCK BOWL onto the bowl locking plate.
5. LOWER THE MIXER HEAD by pressing the mixer
head release button and guiding the mixer head down
carefully with your hands.
6. PLUG POWER CORD into 3-prong electrical outlet.
7.TURN TOUCH WHEEL CONTROL until desired
setting is illuminated.
8. PRESS “START/STOP” BUTTON in center of wheel.The mixer will start
gradually, to avoid spattering, and build up to the selected speed.
9.To PAUSE, press the “start/stop” button again.The mixer will stop.To restart at
the same speed setting, simply press “start/stop” again.The mixer will resume,
ramping up to the selected speed.
10.To CHANGE THE SPEED, simply turn the touch wheel control until the
desired setting is illuminated.
11.To TURN MIXER OFF, turn the touch wheel control to “OFF.” Unplug the
power cord from the electrical outlet.
12. REMOVE ATTACHMENTS by pressing them up as far as possible, then turn
counterclockwise to release. Pull from the attachment post.
To avoid risk of injury, be sure to press “stop” before scraping the sides of the bowl.
The bowl is designed to mix effectively and require minimal scraping. Never attempt
to scrape the sides of the bowl while the mixer is operating.
WARNING