Filter
Top Products
26
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Press the P button to enter programming mode. You can navigate
through the program items and permanently save the required set-
tings simply by turning the Rotary Switch and using the multi-func-
tion buttons. The following settings can be made:
Program item Sub-item Explanation
‘Maintenance status
(1/5)’
‘Clean’,
‘Change the filter’,
‘Descale’ (only if filter is
not activated),
‘Rinse the milk system’,
‘Rinse the coffee system’,
‘Clean the milk system’
T Start the required maintenance program
here.
‘Product settings
(2/5)’
‘Expert mode’,
‘Set consistency of grind’
T Select your settings for specialty coffees,
milk and hot water.
T Adjust the consistency of grind for both
grinders to the coffee beans used.
‘Machine settings
(3/5)’
‘Maintenance settings’
(filter, water hardness,
switch-on rinse, milk
system rinsing),
‘Time / date’,
‘Timer’,
‘Save energy’,
‘Units’,
‘Factory setting’
T Adjust the water hardness or activate the
filter.
T Change the settings for the switch-on rinse
and milk system rinse.
T Set the time after which the GIGA should
switch off automatically.
T Select an energy-saving mode.
T Select the unit for the amount of water.
T Reset the machine or the permanently set
values of all products to the factory settings.
J WARNING
Possible settings in
programming mode