Filter
Top Products
36
4 Permanent settings in programming mode
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘Factory setting’
O T Press the P button to exit programming mode.
‘Please select product:’
In this program item you can set the language used by your GIGA.
Example: Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (4/5)’
is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
E To display more languages, press the ‘Next’ button (bottom
right).
T Press the
‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen (4/5)’
O T Press the P button to exit programming mode.
‘Bitte wählen Sie Ihr Produkt:’
In the program item ‘Machine settings (4/5)’ / ‘Display’ you can make
the following settings:
U
‘Brightness’ (as percentages)
U
‘Contrast’ (high, normal, low)
U
‘Backlight’ (backlighting; as percentages)
Example: Proceed as follows to change the brightness of the display.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (4/5)’
is displayed.
T Press the
‘Display’ button.
‘Display’
Language
Display settings