Filter
Top Products
40
5 Maintenance
You can perform coffee system rinsing at any time.
Precondition:
‘Please select product:’ is displayed.
T Place a receptacle under the dual spout.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Rinse the coffee system’ button.
‘Machine is rinsing.’, water flows out of the dual spout.
The rinse stops automatically.
‘Please select product:’
appears on the display.
Depending on the setting in programming mode, the GIGA prompts
you to rinse the milk system or automatically performs rinsing fol-
lowing milk preparation.
Example: Proceed as follows to rinse the milk system when
prompted to do so.
Precondition:
‘Rinse the milk system.’ and the c symbol are dis-
played.
T Place a receptacle under the dual spout.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Rinse the milk system’ button.
‘Milk system is being rinsed.’, water flows out of the dual
spout.
The rinse stops automatically.
‘Please select product:’
appears on the display.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily when you have been preparing milk. The
GIGA will not prompt you to clean the milk system.
Non-recommended cleaning agents will not optimally remove milk
residues. This may cause the cappuccino frother to become blocked
and fly off the machine. Discharge of hot steam.
T Use only original JURA Cappuccino Cleaner.
Rinsing the coffee system
Rinsing the milk system
Cleaning the milk system
J WARNING