Filter
Top Products
29
4 Permanent settings in programming mode
T Press the ‘+’ or ‘–’ button to change setting for the amount
of milk to
‘6 sec.’.
T Press the
‘Save’ button.
T Press the
‘Amount of milk foam’ button.
T Press the
‘+’ or ‘–’ button to change setting for the amount
of milk foam to
‘14 sec.’.
T Press the
‘Save’ button.
T Press the
‘Volume’ button.
T Press the
‘+’ or ‘–’ button to change setting for the fill vol-
ume to
‘1.0 oz’ (40 ml).
T Press the
‘Save’ button.
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Product settings (2/5)’ / ‘Set consistency of
grind’
you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind setting is correct if the coffee flows regu-
larly from the dual spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Product set-
tings (2/5)’
is displayed.
T Press the
‘Set consistency of grind’ button.
‘Set consistency of grind’
T Press the ‘Right grinder’ button.
‘Right grinder’
T Press the ‘+’ or ‘–’ button to change the setting for the con-
sistency of grind.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Set consistency of grind’
O T Press the P button to exit programming mode.
‘Please select product:’
Setting the consistency
of grind