Filter
Top Products
28
4 Permanent settings in programming mode
Product Coffee strength Amount More settings
Two cappuccini,
two caffè latte,
two espressi
macchiati,
two latte macchiati
– Water: 0.5 oz – 8.0 oz
(25 ml – 240 ml)
Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
(per cup)
Temperature (low,
normal, high),
grinder on the left and/or
right (as %)
Portion of milk
foam,
portion of milk
– Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
–
Two portions of milk
foam,
two portions of milk
– Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
(per cup)
–
Hot water – Water: 0.5 oz – 15.0 oz
(25 ml – 450 ml)
Temperature (low,
normal, high)
E In addition to the settings listed, you can reset the values for
all products to the factory settings.
Example: Proceed as follows in the
‘Expert mode’ to change the
amount of milk for a latte macchiato from
‘4 sec.’ to ‘6 sec.’, the
amount of milk foam from
‘12 sec.’ to ‘14 sec.’ and the amount of
water from
‘1.5 oz’ (45 ml) to ‘1.0 oz’ (40 ml).
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Product set-
tings (2/5)’
is displayed.
T Press the
‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the
‘Latte macchiato’ button.
T Press the
‘Amount of milk’ button.