Filter
Top Products
10
2 Preparation
k T Press the Rotary Switch to enter the
programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is set.
HARDNESS
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Adjusting the grinder
You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
CAUTION
If you adjust the consistency of grind when the
grinder is not operating, the grinding wheel could
be damaged.
T Only adjust the consistency of grind when
the grinder is running.
The consistency of grind setting is correct if the
coffee flows regularly from the coffee spout. In
addition a fine, thick crema forms.
Example: Change the consistency of grind during
the preparation of a coffee.
T Place a cup under the dual spout.
> T Press the Coffee button to start preparation.
T Turn the grinding wheel to the desired
position while the grinder is running.
1COFFEE, the preset amount of water
flows into the cup and preparation stops
automatically.
READY
2 Preparation
E You can interrupt preparation at any time
while a speciality coffee or speciality coffee
with milk is being prepared. Just press any
button.
E Before and during the grinding operation
you can select the coffee strength for
‘1 coffee’, ‘cappuccino’ and ‘latte macchiato’:
MILD, NORMAL, STRONG.
E During preparation, you can change the
preset amount of water by turning the
Rotary Switch.
E You can follow the current status of
preparation on the progress bar.
You can make permanent settings for all products
in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Products’).
Coffee
Precondition: READY is displayed.
T Place a cup under the dual spout.
> T Press the Coffee button to start preparation.
1COFFEE, the preset amount of water
flows into the cup.
Preparation stops automatically.
READY