Filter
Top Products
18
5 Maintenance
Dismantling and rinsing the dual spout
The dual spout should be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly. Your ENA will not prompt you
to clean the dual spout.
T Remove the milk pipe and rinse thoroughly
under running water.
T Press the releasing devices and pull the dual
spout down and off.
T Push the milk system down and remove it.
T Dismantle the milk system into its individual
parts.
T Rinse all parts under running water. If there
are severely dried on milk residues, firstly
immerse the individual parts in JURA
Cappuccino Cleaner and then clean them
thoroughly.
T Fit the air intake pipe.
T Reassemble the milk system, noting the
numbering on the parts.
T Insert the assembled individual parts into
the dual spout and press them together.
T Fit the dual spout on the machine. It will
click into place audibly.
Changing the filter
E After 50 litres of water have flowed through,
the filter will cease to work. Your ENA will
automatically prompt you to change the
filter.
E After two months, the filter will cease to
work. You can check the elapsed time by
referring to the date plate on the filter holder
in the water tank.