Filter
Top Products
24
8 Transport and environmentally friendly disposal
8 Transport and environmentally
friendly disposal
Transport / Emptying the system
Keep the packaging for your ENA. It should be used
to protect the machine during transport.
In order to protect the ENA from frost during
transport, the system must be emptied.
Precondition:
READY is displayed.
T Place a receptacle under the hot-water
nozzle.
l T Turn the switch anticlockwise to position m.
WATER, hot water flows out of the
hot-water nozzle.
T Remove and empty the water tank.
Hot water will continue to flow until the
system is empty.
CLOSE TAP
y T Turn the switch clockwise to position o.
FILL WATER TANK
Q T Press the On/Off button to switch the
machine off.
E The next time you use the machine the
system must be refilled (see Chapter 1
‘Preparing and using for the first time –
First-time use’).
Disposal
Please dispose of old machines in an environmen-
tally neutral way.
H
Old machines contain valuable, recyclable materi-
als which should be recycled. Please therefore
dispose of old machines via suitable collection
systems.
9 Technical data
Voltage 220–240 V ~,
50 Hz
Power 1450 W
Conformity mark
A S
Energy consumption
ECONOMY-
Approx. 12 Wh
Energy consumption
ECONOMYp
Approx. 3.5 Wh
Pump pressure Static, max. 15 bar
Holding capacity of water
tank (without filter)
1.1 l
Holding capacity of bean
container
125 g
Holding capacity of coffee
grounds container
Approx. 10 servings
Cable length Approx. 1.1 m
Weight Approx. 9.4 kg
Dimensions (W × H × D) 23.8 × 36 × 44.5 cm