Jura Capresso 9 Coffeemaker User Manual


  Open as PDF
of 27
 
14
4 Permanent settings in programming mode
U
Coffee strength: MILD, NORMAL,
STRONG
U
Amount of water: 25ML – 240ML
U
Temperature: NORMAL, HIGH
Permanent settings in programming mode always
follow the same model.
Example: Permanently change the coffee strength
(
FLAVOUR) for 1 coffee from NORMAL to
STRONG.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
PRODUCT is
displayed.
k T Press the Rotary Switch to enter the
programme item.
SELECT BUTTON
E Next select the button of the product for
which you would like to make settings. No
product is prepared at this point.
E To change the setting for a double product,
press the corresponding button twice within
two seconds.
> T Press the Coffee button.
1COFFEE
WATER
g T Turn the Rotary Switch until FLAVOUR is
displayed.
k T Press the Rotary Switch to enter the
programme item.
NORMAL
g T Turn the Rotary Switch until STRONG is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is set.
FLAVOUR
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the pro-
gramme item.
PRODUCT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Energy-saving mode
The ENA can be permanently set to an energy-sav-
ing mode (Energy Save Mode, E.S.M.
©
):
U
ENERGY-
U
The ENA is constantly ready for use.
U
All speciality coffees as well as hot water can
be prepared without having to wait.
U
ENERGYp
U
Soon after the last preparation, the ENA
stops heating up. As soon as the energy-sav-
ing temperature is reached, this is indicated
in the display by the message
ENERGY
ON – this may last several minutes. The
machine must heat back up before the next
preparation.
U
Before coffee and hot water preparation, the
machine heats up.
Example: Change the energy-saving mode from
ENERGY- to ENERGYp.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
ENERGY- is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMY-
g T Turn the Rotary Switch until ECONOMYp
is displayed.
 previous next