17
5 Maintenance
pt
es
nl
it
fr
ru
en
de
k T Press the Rotary Switch to initiate the rinse
operation.
RINSING, the system rinses itself,
stopping automatically.
READY
Rinsing the milk system
After each milk preparation, the ENA prompts you
to perform a cappuccino rinse.
Precondition:
CAPPUCCINO RINSE is
displayed.
T Place a receptacle under the dual spout.
k T Press the Rotary Switch to start the
cappuccino rinse.
CAPPUCCINO RINSING, the milk
system is rinsed.
The rinse stops automatically and
READY
appears on the display.
Cleaning the milk system
The dual spout should be cleaned daily if milk has
been prepared to make sure it functions perfectly.
Your ENA will not prompt you to clean the dual
spout.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
behind in the milk.
T Use only original JURA maintenance
products.
E JURA Cappuccino Cleaner is available from
stockists.
k T Press and hold the Rotary Switch until
RINSE appears.
k T Press the Rotary Switch to enter the
programme item.
C-CLEAN
k T Press the Rotary Switch to start cappuccino
frother cleaning.
CLEANER FOR CAPPU.
T Remove the milk pipe from the receptacle
with milk.
T Pour 250 ml of fresh water into a receptacle
and add one capful (max. 15 ml) of Cappuc-
cino Cleaner.
T Immerse the milk pipe in the receptacle.
T Place another receptacle under the dual
spout.
k T Press the Rotary Switch.
CLEANING, the milk system and the pipe
are cleaned.
The operation is interrupted,
WATER FOR
CAPPUCCINO.
T Rinse the receptacle thoroughly, fill it with
250 ml of fresh water and immerse the milk
pipe in it.
T Empty the receptacle under the dual spout
and place it back underneath.
k T Press the Rotary Switch.
CLEANING, the milk system and the pipe
are rinsed with fresh water.
The operation stops automatically.
READY