Kambrook KBM300 Bread Maker User Manual


 
24 25
Care, Cleaning and Storage
Before cleaning your Bread Maker,
switch off and then unplug from the
power outlet and allow the bread
maker to cool completely.
Bread Maker
The inside and outside of the Bread
Maker and lid should be wiped with
a soft, damp cloth then dried
thoroughly. If overspills, such as flour,
nuts, sultanas, etc. occur in the baking
chamber, carefully remove, using
a damp cloth. Before re-using your
bread maker ensure that all parts are
completely dry.
NOTE: NEVER immerse the Bread
Maker, lid, kneading blade or the
bread pan in water or place in
the dishwasher. Take care not to
allow water or cleaning fluids to
seep under the buttons or LCD
screen on the control panel.
Bread Pan and
Kneading Blade
The inside of the bread pan and
kneading blade are coated with a
high quality, non-stick coating. As with
any non-stick coated surface, NEVER
use metal utensils or abrasive cleaners
on these items.
To Clean the Bread Pan
and Blades:
Half fill the pan with warm soapy
water (use a non-abrasive detergent),
allow to stand for 10-20 minutes.
Remove the kneading blade and
clean both blade and inside of bread
pan using a soft cloth. Be sure to
remove any crust or dough that may
become lodged around the drive
shaft and the kneading blade.
NOTE: Do not immerse the
outside of the bread pan in water
as this may interfere with the free
movement of the wing-nut and
drive shaft. Submerge and wash
only the interior of the bread pan.
WARNING: Do not
use harsh cleaners,
abrasives, brushes or
steel wool.
Never wash the bread
pan or kneading blade
in the dishwasher.
NOTE: Some discolouration may
appear on the bread pan over
time. This is a natural effect cause
by moisture and steam and will
not affect the bread in any way.
Storage
When storing the Bread Maker, switch
off and then remove the power plug
from the power outlet. Ensure it is
completely cool, clean and dry. Place
the bread pan and kneading blades
into the baking chamber and close
the lid. Do not place heavy objects on
top of the lid. Store the Bread Maker.
Replacement Bread Pan
and Blade
Both the blade and bread pan
coating are operating parts of the
Bread Maker and as such are subject
to normal wear and tear over the
life of the maker. Depending on
your usage of the Bread Maker they
may need replacement if the bread
begins to stick.
Spare Parts
Replacement parts are available from
Kambrook Spare Parts:
Australia Customer Service:
1300 139 798