Kambrook KFP100 Food Processor User Manual


 
3
Fully unwind the power cord before use.
Do not let the power cord hang over the edge of
a bench or table, touch hot surfaces or become
knotted.
To protect against electric shock do not immerse
the power cord, power plug or motor base in
water or any other liquid.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they
do not play with the appliance.
It is recommended to regularly inspect the
appliance. Do not use the appliance if power
cord, power plug or appliance becomes damaged
in any way. Return the entire appliance to the
nearest authorised Kambrook Service Centre for
examination and/or repair.
Any maintenance other than cleaning should be
performed at an authorised Kambrook Service
Centre.
This appliance is for household use only. Do not
use this appliance for anything other than its
intended use. Do not use in moving vehicles or
boats. Do not use outdoors. Misuse may cause
injury.
The installation of a residual current device (safety
switch is recommended to provide additional
safety protection when using electrical appliances.
It is advisable that a safety switch with a rated
residual operating current not exceeding 30mA
be installed in the electrical circuit supplying the
appliance. See your electrician for professional
advice.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
and the processing blade or disc, have completely
stopped before disassembling. Ensure the Speed
Selector Dial is turned to the ‘OFF’ position, the
appliance is switched off at the power outlet and
unplugged, before removing the lid from the bowl.
The processing bowl should then be unlocked
from the motor body and the processing blade or
disc holder carefully removed before attempting
to remove the processed food.
Do not blend a dry, thick or heavy mixture for more
than 60 seconds without turning the blender/food
processor off and stirring the ingredients before
continuing to blend.
If the food processor is operated continuously for
too long, it should be allowed to rest for 25-30
minutes before recommencing.
Do not use the processor and blender at the
same time.
Do not process hot or boiling liquids – allow
liquids to cool before placing into the processing
bowl or the blender jug.
Do not move the food processor whilst in operation.
Do not leave the food processor unattended when
in use.
Do not place any part of the food processor in the
dishwasher or microwave oven.
Do not process thin fluids such as water, milk, stock,
juice, etc., above 500ml level in the processing bowl
as this could result in overflow. To reduce the risk
of overflow, always add drier or thicker ingredients
to the processing bowl prior to adding fluids.
Do not place anything on top of the food processor
when the lid is on, when in use and when stored
Keep the food processor clean. Follow the
cleaning instructions provided in this book.
KFP100_FOODPROC_IB_FA.indd 3 29/5/09 4:27:53 PM