Filter
Top Products
9
Correct placement of the blender jug
Unlock and remove the blender drive cover.
Align the arrow
on the lower edge of the blender
jug with the align handle arrow
on the motor
cover. Turn the blender jug clockwise until the arrow
on the blender is aligned with the lock handle arrow
on the motor cover, a “click” sound will be
heard.
Ensure the speed dial is in the ‘OFF’ position.
Insert power plug into a 230/240 volt power outlet.
Turn power on.
The blender is now ready to use.
Place ingredients into the jug. Note do not overfill
the jug (i.e., above the MAX mark).
Firmly fit the lid to the top of the blender. Ensuring
that the ‘filler cap’ (inside the lid) is correctly locked
into position.
With your hand on top of the blender lid initially, turn
the ‘Power Control Dial’ from the ‘OFF’ position to
either the Low, Medium or High speed, depending
your requirements. The speed can be changed at any
time during blending.
For short bursts of power, use the “PULSE” setting.
If ingredients stick to the sides of the jug during
blending, turn the speed dial to the ‘OFF’ position,
switch off at the power outlet, remove lid and then
push the food back onto the blades using the plastic
spatula to scrape down the sides of the jug. Then
replace lid and recommence blending.
Ingredients can be added during blending by
removing the ‘filler cap’ and placing/pouring
additional ingredients through the hole.
Note: Do not overfill the blender jug above the MAX
mark.
This blender is not recommended for blending dry
ingredients.
When blending is complete, turn to the ‘OFF’
position. Wait until blades have stopped rotating
before removing the lid or jug.
MAINTAINING YOUR KAMBROOK
DUAL FOOD PROCESSOR & BLENDER
Always turn the power off at the power outlet and
then unplug before disassembling any parts.
Wash the blender jug, lid, filler cap, processor bowl,
blades, food pusher in warm soapy water after each
use. Rinse thoroughly and dry.
Do not soak steel parts.
The processing blade and slicing/grating discs are
extremely sharp! Use caution when handling and
storing these parts. Always store the processing
blade with the protective covers provided.
Store the food processor with the processing blade in
the bowl and the lid and the food pusher in position,
but DO NOT lock as this places unnecessary strain
on the operating switch.
Never use an abrasive cleaner. Do not place any
parts in the dishwasher.
Wipe the motor base with a soft, damp cloth.
DO NOT immerse the motor base, power plug or
cord in water or any other liquid.
THE STAINLESS STEEL PROCESSING BLADE
The cutting edges of this blade are extremely sharp,
it should only ever be held by the central plastic
spindle.
ALWAYS store the blade with the protective cover
provided.
✓
KFP100_FOODPROC_IB_FA.indd 9 29/5/09 4:28:01 PM