Filter
Top Products
CONTROLS
When Ihe processor is ptugged in. the blue Power light illuminates to show the{ the unit Is
connected to a power source When the base. bowl and cover assembty is correctly
connected and lacked into place, the OFF button is also illuminated blue to show that the
unit is ready to operate, if the OFF button is not giewing blue, the bowl and cover are not
locked together correctly
PULSE: When the PULSE button is pushed and held, it ilturnirmles blue and the Food
Processor operates As soon as you tet go of the button, the Processor shuts elf and the
PULSE button tight goes out Use PULSE for short processing tasks, such as chopping nuls.
raw meats or vegetables This atlows you much greater control of the consistency of whal
you are processing,
ON: When the ON butlon is pushed, tt lfluminates biue and the oni1wiil run continuously
The processor wilt stay on until you push lhe OFF button This is good lot tess tender food
end items that fake a while longer to process.,
CHOPPING:
! Lock the Bowl onfo the Base as described in Assembly,
2 Place the Mullipurpese,'Chopping Blade Ohio the
Center Post (see Fig 4),
'i
CAUTION: Blades
are sharp_ Handle carefully., J
3 Place food to be chopped Into Bowl Refer to Food Guide to
prepare feed for chopping
4 Lock Bow[ Cover Assemb}y onto Bowl. as described in
Assembly.
5 Lock the Food Pusher into the Movabfe Loop by rotating
counterclockwise until the food pusher's lab is under slot
in the movable loop s lid, then _ock food chastelid into the
spring operated slide bullon by pressing down firmly
6 Plugthe cord into an electric oulleL The Food Processors power ;ight illuminates blue
to show il is connected to a power source, and the OFF button illuminates if base bowl
and cover aseemb y are a locked into piece
7 Push the ON button to run conslantly, or for better control over consistency, push and
held PULSE button
When finished processing;
,. it Pulsing. stop pressing butlon and unit aulomaticafly stops
', if you turned processor to ON. push the OFF bulton to stop
• Allow the rnuIilporpoee/chopplng blade to stop rotating