Filter
Top Products
Setting Oven Controls (con't)
Setting Oven Lockout Feature
The _ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the Oven from being turned ON. it does not disable the clock, Kitchen Timer or the interior oven lights.
iNSTRUCTiONS PRESS DISPLAY
To activate the Oven Lockout feature
t. Press and hold _ for 3 seconds (Figure t ).
v
2. After 3 seconds "LOC" will appear, a beep will sound and
"DOOR LOCKED" will flash in the display. Once the oven door
is locked the "DOOR LOCKED" indicator will stop flashing and
remain on along with the "LOC".
To reactivate normal oven operation:
t. Press and hold _ for 3 seconds. A beep will sound. The
"DOOR LOCKED" will flash in the display until the oven door
has completely unlocked and "LOC" has cleared (figure 2).
2. The appliance is again fully operational.
@
for 3 seconds
@
for 3 seconds
Figure 1
Figure 2
To Set the Cooktop Lockout Feature _COOKTOP
The _ pad is used to activate the Cooktop Lockout feature which will lock all surface elements from being accidentally
turned ON. This feature will only lock the cooktop.
INSTRUCTIONS
To turn the Cooktop Lockout Feature ON:
1. BE SURE ALL surface element controls are set to the OFF position.
2. Press and hold _ until "CLO" appears. Continue holding until a
second beep sounds (after 3 seconds). Ifa triple beep sounds instead,
check all surface elements and turn them to the OFF position and repeat
this step. I_1will appear in the display indicating the cooktop controls and
functions are locked out until the cooktop is unlocked (See Figure 3).
3. To remove "CLO" from the display, press _ or wait 30 seconds
v
(See Figure 4).
PRESS
To turn the Cooktop Lockout Feature OFF:
1. BE SURE ALL surface element controls are set to the OFF position.
2. Press and hold _ until "CLO" appears. Continue holding until a (.,[_
second beep sounds (after 3 seconds). If a triple beep sounds
instead, check all surface elements and turn them to the OFF
position and repeat this step. I_1will disappear from the display
indicating the cooktop may be used normally (See Figure 5).
3. To remove "CLO" from the display, press _ or wait 30 seconds
(See Figure 6).
DISPLAY
Figure 3
Figure 4
Figure 5
Figure 6
Note: Starting a Self-Clean cycle will automatically turn ON the Cooktop Lockout feature. The cooktop will remain locked
until the Self-Clean cycle has completed and the oven door has unlocked. If a power failure occurs after the Cooktop
Lockout has been activated, you must turn OFF the Cooktop Lockout feature before being able to use the cooktop features
again.
16