Filter
Top Products
Setting Oven Controls (cont'd)
Setting Convection Convert Feature
The CONVERTpad is used to automatically convert a standard baking recipe for convection baking. When set properly, this
feature isdesigned to display the actual converted (reduced) temperature in the display.
Convection Convert may ONLY be used with a Bake, Timed Bake, Delayed Start or Delayed Timed Bake setting. When
used with a Timed Bake, a Delayed Timed Bake setting, the Convection Convert feature will display a "CF" for check food
when the bake time is 75% complete (see Figure 4). At this time the oven control sound 3 beeps at regular intervals until
baking has finished. When the bake time has completely finished the control will display "End" and will sound 3 beeps
every 30 seconds until the _ is pressed (see figure 5).
INSTRUCTIONS PRESS DISPLAY
Using Convection Convert (Bake) feature to
automatically adjust oven temperature (example: below
when setting oven for 350°F (°C))
t. Arrange interioroven racks and place food in oven.
2. Press _, "===°" will appear in the display (Figure t
).
3. Press _-_ _'_ _0"_. "BAKE" will flash and "350°'' will appear
in the display (Figure 2). If a Timed Bake or a Delayed Timed Bake
is desired, enter times now.
4. Press CONVERT'"CONV", "BAKE" and the oven temperature
adjustment will appear in the display (for this example 325°F). A
beep will sound once the adjusted oven temperature is reached. The
display will show "325 °'', "CONV", "BAKE" and the fan icon (Figure
3).
Note: The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating (See
rotating fan in figure 3).
Press _ to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection Convert
feature with a Timed Bake or a DelayTimed Bake is 20 minutes.
Figure 1
Figure 2
CONVERT
Figure 3
Figure 4
@
Figure 5
22