Filter
Top Products
Setting Oven Controls (con't)
Consumer Defined Control Features
Setting Temperature Display -- Fahrenheit or Celsius:
.............. @The BROIL and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press Broil Broil
(Figure 1) and hold for 7 seconds; "550 °'' will appear and for 7seconds
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press _ to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C" (Figure
3).
3. Press START:to accept the change or press ST_ to reject the
change.
Figure 1
[al
[nni
20
Figure 2
STARTor Figure 3