Filter
Top Products
Setting Oven Controls (ton't)
Setting Convection Roast
This method of cooking enables you to obtain the best results when roasting. The oven can be programmed to
convection roast at any temperature from 170°F to 550°F (77°C to 288°C). Preheating the oven is not necessary when
cooking meats with Convection Roast. Remember to use tested recipes with times adjusted for convection roasting when
using the convection roast mode. Times may be reduced by as much as 30% when using the convection feature. This
oven is equipped with multiple fan speeds for even cooking when baking and better tasting meats when roasting. It will
use a faster fan speed for roasting which will quickly strip the cold air away from the meats replacing it with warm air
(making a crisp outside type of searing) sealing in juices for better tasting meats.
INSTRUCTIONS PRESS DISPLAY
To Set the oven to Convection Roast (example: 375°F)
1. Arrange oven racks and place food in oven.
..................
2. Press "350°''willbe displayed;CONVROAST willflash (Figure1).
3. Enter the desired roasting temperature using the number pads Q _ Q Q Figure 1
(_ (Figure 2).
4. Press STARTCONY ROAST and the fan icon will be displayed (Figure
......... Figure 2
3). The Bake, Broil and Convection elements will also cycle for a better
heat distribution.
To Change the Convection Roast temperature
(example: changing from 375°F to 425°F)
Figure 3
1. Press "375 °''
Roast, willbe displayed; CONV ROAST willflash (Figure 2). ......
EnterthedesiredroastingtemperatureusingthenumberpadsQ Q Q
Q Q/Figure4/.
............... Figure 4
3. Press START'the current oven temperature, CONY ROAST and the START
fan icon will be displayed (Figure 5).
After the oven has reached the desired temperature, the control will beep
and CONV ROAST light will stay on. Note: The Bake, Broil and Figure 5
Convection elements will cycle for a better heat distribution.
roasting is complete press _. sT_
When convection
Setting Convection Convert
CONY CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When
The £onv_r_
set properly, this feature is designed to display the actual converted (reduced) temperature in the display.
Convection Convert may ONLY be used with a Cony Bake, Timed Cony Bake or a Delay Start (Delayed Timed Conv
Bake) setting. When used with a Timed Bake or a Delay Start (Delayed Timed Bake) setting, the Convection Convert will
display a "CF' for Check Food when the bake time is 75% complete (See Fig. 8). At this time the oven control will sound 3
long beeps at regular intervals until baking has finished. When the bake time
has completely finished the control will display "End" and will sound 3 long
beeps every 30 seconds until the 0 pad is pressed.
To change from a normal bake recipe to a convection bake
recipe (example: changing a 400°F (204°C) normal bake
recipe to a convection bake recipe)
With the Conv Bake mode on at 400°F (204°C) (Figure 6), press Convert'"CONV ....
............ _Qnvert
BAKE" and the oven temperature adjustment will appear in the display (for
this example it is 375°F). A beep will sound once the adjusted oven
temperature is reached. The display will show "375 °'', "CONV BAKE" and the
fan icon (Fig. 7). NOTE:When using a Cook Time, the convection convert will
not operate if you have a timed bake under 20 minutes.
25
Figure 6
Figure 7
Figure 8