Filter
Top Products
LEVELING THE REFRIGERATOR DOOR
Place JeveJ on top of the refrigerator as shown below.
If your refrigerator is not level, insert a fiat blade screwdriver
into the grooves of the leveling legs (shown in picture below).
Rotate legs clockwise to raise or counterclockwise to lower the
front of the refrigerator.
Left levelingleg
Right levelingleg
Raise the front of the refrigerator enough so the doors close
freely when opened halfway. The refrigerator should slope 1/4"
(6.35 rnm) to 1/2" (12. 7 ram) from front to back.
Then level the refrigerator from side to side.
HANDLE REMOVAL (TYPE 1)
(identify your handle type)
NOTE: It is ALWAYS recommended to remove the refrigerator
doors when it is necessary to move the refrigerator through a
narrow opening. If necessary, follow the directions below to
remove the door handles.
" Loosen the set screws with a _32" (2.38 mm) Ailen wrench and
remove the handle.
NOTE: If the handle mounting fasteners need to be tightened
or moved, use a 1/4" (6.35 ram) AHen wrench.
Mounting
fasteners
"'. Set screw
wrench
9