Filter
Top Products
HANDLE REMOVAL (TYPE 2)
• Grasp the handle tightly with both hands and slide the
handle up _ (this may require some force).
° The keyhole slots _ on the back of the handle allow the
handle to separate from the mounting screws Q.
° Then puii the handle towards you.
CAUTION: Use extreme care to prevent damage if using a
rubber mallet to remove the handles.
CAUTION: It may take some force to assemble
or
dissemble the handles.
(_
Screws
mounted
on door
Keyhole slots_
on back of /> L_
handle /
/
EJectrlc Shock Hazard
* Disconnect electrical supply to the refrigerator before
installing. Failure to do so could result in death or serious
injury.
° Do not put your hands or feet or other objects into the air
vents° base griiler or bottom of the refrigerator.
° Be careful when you work with the hinger base grille and
stopper. You may be injured.
REMOVING AND REPLACING REFRIGERATOR DOORS
Before removing the doors r remove the base grille. See BASE
GRILLE INSTALLATION for reference.
1.Open the door. Remove the top hinge cover screw (1).
2.Use a fiat blade screwdriver to pry back the hooks (not
shown) on the cabinet underside of the cover (2). Lift up the
cover.
3. Rotate the hinge lever (3) clod<wise. Lift the top hinge (4)
free of the hinge lever latch (5).
NOTE: Regardless of hinge lever type r removal process is the
same.
4.Lift the door from the lower hinge pin.
5. Place the door, inside facing up, on a non scratching
surface.
_'_ CAUTION: When lifting the hinge free of the latch, be
careful that the door does not fall forward.
10