Filter
Top Products
TEMPERATURE CONTROLLED "HI-POWER"
COOKING AND AUTOMATIC "HOLD WARM"
The "Temperature Control Meat Cooking Guide" and "Reheating Guide" on Pages 15 and 16 will show you which multi-
power setting and doneness temperature are recommended for the food you are cooking. When cooking with the
temperature control settings, the timer is not used.
.
.
Place the temperature probe into the food with the first
inch of the sensor in the center of the food. Adjust the
length of the temperature probe by sliding the grom-
met before inserting it into food so that the sensitive
area of the probe can
always be placed in the
center of the meat. The
probe should be in a
angle as shown. It
should not be put in
from the top.
Plug the temperature
probe into the socket on
the side of the oven.
Caution: Do not plug
the pointed end of the
temperature probe into
the socket.
3. Touch CLEAR.
®
NOTE: It is not necessary to touch COOK CONTROL
when you are cooking with "HI (MAX POWER)". How-
ever, if you touch COOK CONTROL the light above
COOK will go on and the word "HI" will show in the
display window. This is to remind you that the oven will
work at "HI (MAX POWER)" unless a different power
setting is chosen.
6,, Touch START. The oven will
begin to cook and you will be
able to see the temperature of
the food rising in the display
window.
A tone will sound for one
second when the desired
temperature is reached.
4. Touch TEMP CONTROL. The
lights above TEMP and below
STAGE I will go on, and "F"
will show in the display win-
dow.
.
Choose the food temperature
and touch the corresponding
numbers. For example, if the
recipe calls for doneness at
120°F, you would touch the
numbers "'1", "2" and "0".
When you touch "120" the
display window will show
"I20F". If the temperature
probe is not plugged into the
socket, the probe light will flash
and the oven will not work.
, The oven will switch into
"Hold Warm" to keep the
food warm. "Hold" will show
in the display window. The
cook control setting changes
to "10 (WARM)". To check
the temperature being held,
touch TEMP CONTROL.
The "holding" temperature
_11 show in the display win-
dow. The "Hold Warm" will
continue for 60 minutes after
the food reaches the chosen
temperature or until the door
has been opened or until
STOP has been touched. If the
door is opened, the "Hold
Warm" will stop. To reset, sim-
ply touch TEMP CONTROL,
the corresponding numbers
and START.
Kenrnore _:'._ EM^_,-n:J_
,&ulo P,e_'ipe 300
|11|i
NOTE: The highest temperature
to which the food may be set is
200°F. The temperature is dis-
played in I°F increment.
17