Kenmore 85941 Microwave Oven User Manual


 
TEMPERATURE CONTROLLED "MULTI-POWER"
COOKING AND AUTOMATIC "HOLD WARM"
The "Temperature Control Meat Cooking Guide" and "Reheating Guide" on Pages 15 and 16 will show you which
multi-power setting and temperature setting are recommended for the food you are cooking.
Io
.
.
4.
.
.
.
18
Place the temperature probe into the food with the
first inch of the sensor in the center of the food. See
step I on page 17.
Plug the temperature probe into the socket on the
side of the oven. See step 2 on page 17.
CAUTION: Do not plug the pointed end of the tern-
perature probe into the socket.
Touch CLEAR.
Touch TEMP CONTROL.
The lights above TEMP and
below STAGE 1 will go on,
and "F" will show in the
display window.
Choose the food tempera-
ture and touch the corres-
ponding numbers. For
example, if the recipe calls
for aloneness at 155°F, you
would touch numbers 1
"5" and "5". When you
touch "155", the display
window will show "155F". If
the temperature probe is not
plugged into the socket, the
probe light will flash and the
oven will not work.
Kenrnore s_,_ II
__T_n I__-1/11
14 p!_.-,,,416 I1-= 1/11
I 7 II e II 9 I_/11
I ..=._.,o _mz i.;.=...,.=_1/11
Touch COOK CONTROL.
The light above COOK will go
on. Also, the word "HI" will
show in the display window
until you enter a lower power
setting. This is to remind you
that the oven will always oper-
ate at full power unless you set
a lower power.
Choose the cook control set-
ring you desire and touch the
corresponding numbers. For
example, if the recipe should
call for cooking at the "70
(ROAST)" setting, you would
touch numbers "7" and "0".
When you touch "7" and "0",
the display window will show
"70". This means that in the
"70 (ROAST)" setting, the
oven is at power level 70.
EEE3F--_
8. Touch START. The oven will
begin to cook and you will be
able to see the temperature of
the food rising in the display
window.
9_, A tone will sound for one sec-
ond when the temperature is
reached. The oven will switch
into "Hold Warm" to keep
the food warm. The cook
control setting automatically
changes to "10 (WARM)".
The display window will
show "Hold".
10. To be sure the correct tem-
perature is being held, you
may touch TEMP CON-
TROL. The "holding" tem-
perature will show in the dis-
play window. The "Hold
Warm" will continue for 60
minutes after the food
reaches the chosen temper-
ature or until the door has
been opened or until STOP
has been touched. Ifthe door
has been opened, the "Hold
Warm" will stop. To reset,
simply touch TEMP CON-
TROL, the corresponding
numbers and START.
NOTE: The highest temperature
that can be set is 200°F.
The temperature is displayed in
I OF increment.
,-: I
r - -
Kenmore sP.,c_:_..,.,.,_._
AUtO ReCil._' 3(X)
E NN
[-7-1r-_r--_
r-=-lr=-i
l
Kenmore _cEu^_-n_
Auto Recipe 3OO
-
['-_[3£3[-_
[--_f--_[-=-]
[-=3r-_3
_ "-=............. L 'I
_ 1.$ S,':
AUlO Re'cip_ 300
r-_r--:-lP:_
I-r-llE!Elr-5-l : = ,
[-i-ll-_l-_-i
CT-Ir-g-lr-_-I
F=nC=n