Filter
Top Products
CARE AND CLEANING
The Clean Cycle, including cooldown
time, is automatically set for 4 hours,
but you may:change this from 3 hours
if oven is lightly soiled, up to 5 hours if
oven is heavily soiled.i; .:
11, Latch-the ;door handle.
2. Press the CLEAN
pad. 4 hours will show
"in the display.
@_ 3. If you want to change
the length of Clean time
...... press theUP and/or
DOWN arrow pad.
4,, Press the "
": r' 4 START pad.
Simply. pressthe CLEAR/OFF pad.
You will need to wait for the oven
temperature to drop below the lock
temperature (approx. 1 hOur)before
attempting ito open the door.
After the cycle, you may notice some
white ashinthe oven. Just wipe it up
with a damp cloth or sponge,
If white spots remain, scrub them
with a soap-filled steel.wool:pad. Be
sure to rinse thoroughly. These are
usually deposits of salt that cannot
be removed during the cycle.
If for any reason you are not
satisfied with the cleaning
results, just repeat the cycle.
1. Latch the door handle.
2. Press the CLEAN pad.
If you want to change
the length of clean time
press the UP and/or
DOWN arrow pads.
Press the DELAY
START TIME pad
Press the UP and/or
DOWN arrow pads to
set the time you prefer
the clean cycle to start.
Press the START pad.
2O