Filter
Top Products
IMPORTANT SA
INSTRUCTIONS
SAVE THESE INSTRUCTIONS _
Read all instructions before using this appliance...When using
gas or electrical appliances, basic safety precautions should
be followed, including the following=- _,
1!,Decide on a
- All Ranges Can Tip
-Injury to Persons
Could Result
° Install AntFTip
Device Packed With
Remove all parts from the plastic
bag attached to the back of the
range and save packaging tape.
Before placing range in the counter,
check the factory location of the stability
bracket on the back of the range. For
convenience you can hook the stability
chain in the upper set of. holes. Make
sure there is no structural interference
when using the upper set of holes.
location that has
no electrical ....
wiring or
plumbing.
2. With the long
screw provided, anchor the chain to
the floor orwafl. ' '
3. Make sure
'thescrew
is going
into the
wall plate
or stud at
the base of the wa!! at.least 3/4'.
4. Attach the stability chain :so that iflines
up with the •bracket :on the backofthe
range.
5. Tug the chain to make sure it is
securely fastened.
6. Take the
packaging tape
and temporarily
attach the loose
end of the chain to
the rear of the
countertop.
BRACKET__
OPTIONAL
LOCATION
CHAJN_"
BRACKET.,/
FACTORY
LOCATION
R
Slide the range
into the counter leaving enough space
behind to attach the chain to the
bracket ......
8. Slip the nearestlink of the chain onto
the bracket. Pull to make sure it is as
snug as possible.
9, Slide the range all the way back. It is
normal to have some slack in the
chain, but it should not be excessive.
3