Filter
Top Products
SECTION 2 Menu Controls & Indicators (continued)
14
Setting Contact Screen
The contact screen is pre-programmed with
the following information: Keurig, Inc. and
www.keurig.com.
You can reprogram the brewer with your contact
information. The contact screen will appear in
the screen saver.
1. From the Menu Mode, press “CONTACT”.
The LCD screen will display the Keurig
default contact information (fig.19).
2. Press the Upper (Company Name) Box. The
Keypad will appear along with the current
information (fig.20). NOTE: Unless changed by
the user, Keurig contact information will be
present on the display.
a. Press Delete Key repeatedly to remove
current information. Enter new information
using the Keypad.
NOTE: To select Upper Case, Lower Case,
Numerals, Upper Case Accents, Lower Case
Accents, press the Keypad Change Key located at
the bottom center of the screen.
fig.
19
fig.
20
fig.
18
WWW.KEURIG.COM
PHONE #
KEURIG,
INCORPORATED
Contact
OK
Language
Español
English
Français
OK
3. Set the Brewer to “AUTO OFF” to automatically
turn off 2 hours after the last brew.
a. From the Menu Mode, press “AUTO OFF”.
The LCD Display will now display the
“AUTO OFF” programming option (fig.17).
b. To enable the “AUTO OFF” feature, press “ON”.
“ENABLED” will appear on the screen and
press “OK”. To disable the “AUTO OFF” feature,
press “OFF”. “DISABLED” will appear on the
screen and press “OK”.
Language Settings
The Brewer is shipped with English as the default
language. To change the default to Francais or
Espanol, follow the instructions outlined below.
Set Language
1. From the Menu Mode, press “LANGUAGE”.
2. The LCD Display will now display the
Language programming options (fig.18).
3 . Press the desired Language button, then
press OK to confirm your selection.
fig.
17
Auto OFF
Auto Off 2 hours
After Last Brew
OK
OFFON
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
Delete
. , -
Space
KEURIG,
INCORPORATED
OK
ABC
abc
123