Filter
Top Products
Minimum cabiret width above one appliance:
g?$y;f - ‘2
-
IMPORTANT: Observe all
governing codes and
ordinances.
Downdraft vent - 6’
For each additional appliance combined with
the first appliance, add the minimum cabinet
width for that appliance.
cabinet depth 1
/Electric - 1” min.
Gas-l’ ” min. to
backsp
lash or vertical wall
copper.
30” min. clearance
between the top of the
cooking platform and
the bottom of an
unprotected wood or
metal cabinet.
S$e.Note* for
mimmum
I
18” min. clearance upper
cabinet to countertop
I
Electric - 4” min.
Gas - 3” min. countertop
space to side wall or other
combustible surface
l
Note:
24” min. clearance
when bottom of wood
or metal cabinet is
protected by not less
than l/4” flame
retardant millboard
covered with not less
than No. 28 MSG
sheet steel, 0.015”
stainless steel, 0.024”
aluminum or 0.020”
u
supply cord between
cooktop and cabinet.
0 -
as line opening -
Outlet -
Wall
Electric cooktops:
9
5” be ow countertop
Locate supply junction
and centered with
cook-top.
LJ
box on floor or on wall
at least 9” below
Gas supply line
countertop.
piping and electrical
supply MUST NOT
Gas cooktops:
12” max from
interfere with
~;;~drlrf vent
right side of
cook-top; 15” max.
from bottom of
countertop.
/ .
2
Your safety and the safety of others is very important.
We have provided many important safety messages in this
manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol. This symbol
alerts you to hazards that can kill or hurt you
and others. All safety messages will be preceded by the
safety alert symbol and the word “DANGER” or
“WARNING”. These words mean:
You will be killed or seriously injured if you don’t follow
instrG3ons.
You can be killed or seriously injured if you don’t follow
instrZions.
All safety messages will identify the hazard, tell you how ta
reduce the chance of injury, and tell you what can happen
if the instructions are not followed.
WARNING: If the information in this
- Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
-WHAT TO DO IF YOU SMELL GAS
l
Do not try to light any appliance.
l
Do not touch any electrical switch.
l
Do not use any phone in your
building.
l
Immediately call your gas supplier
from a neighbor’s phone. Follow the
gas supplier’s instructions.
l
If you cannot reach your gas
supplier, call the fire department.
- Installation and
service must be
performed by a qualified installer,
service agency or the gas supplier.