Filter
Top Products
The Functions selection control knob is used to select the different oven functions.
Each turn of the control knob corresponds with a function:
Turn the F control knob four clicks anticlockwise. The word SETTINGS appears.
By pressing the cancellation button “<<”, you can cancel the set operation and return to the previous
display.
Once the required setting appears, highlighted in the display, you can confirm by pressing the “OK” button
and move on to the next programming stage.
Depending on the selected function, the navigation control knob “-/+” has different uses:
• To navigate between the menus and sub-menus.
• To increase/reduce the levels indicated.
• To navigate between the cooking functions.
• To increase/reduce cooking time and temperature.
Description of the control panel
6
The first time the oven is switched on the user will be asked to enter the following settings:
• Language
• Brightness
• Sharpness
• The time under the ‘Clock’ setting
Enter the desired values using the “-/+” control knob then confirm by pressing the "OK" button.
First use
Turn the function control button five clicks to the left.
The following message appears:
SETTINGS
-/+ TO CHANGE
In sequence, it is possible to set:
• LANGUAGE (Available languages: ENGLISH (factory setting), GERMAN, FRENCH, ITALIAN, SPANISH,
DUTCH, SWEDISH, NORWEGIAN, DANISH, FINNISH).
• CLOCK
• ALARM
• SHARPNESS
• BRIGHTNESS
Reset brightness and sharpness settings.
To reset brightness and sharpness to factory settings:
Turn the F control knob to “0”.
Turn the F control knob to settings.
Keep the OK control button pressed for 5 seconds.
This will revert the appliance to the factory settings.
Settings