KitchenAid KRFF507EWH Refrigerator User Manual

The Ice Dispenser
Ice dispenses from the ice maker storage bin. To turn off the ice
maker, see “Ice Maker and Storage Bin.”
The dispenser may continue to make noise and ice may continue
to dispense for several seconds after releasing the dispenser
button or paddle.
IMPORTANT: If the ice cubes are hollow or have an irregular
shape, it could be because of low water pressure. See “Water
Supply Requirements.”
To Clean the Ice Dispenser Chute:
Humidity causes ice to naturally clump together. Ice particles can
build up until the ice dispenser chute becomes blocked.
If ice is not dispensed regularly, it may be necessary to empty the
ice storage bin and clean
the ice delivery chute, the ice storage
bin and the area beneath the storage bin every 2 weeks.
If necessary, remove the ice clogging the storage bin and
delivery chute, using a plastic utensil.
Clean the ice delivery chute and the bottom of the ice storage
bin using a warm, damp cloth and dry thoroughly.
To Dispense Ice:
IMPORTANT: You do not need to apply a lot of pressure to the
paddle to activate the ice dispenser. Pressing hard will not make
the ice dispense faster or in greater quantities.
1. Press ICE MODE to select cubed ice (default) or crushed ice.
The display screen indicates which type of ice is selected.
2. Press a sturdy glass against the dispenser paddle. Remove
the glass to stop dispensing. Hold the glass close to the
dispenser opening so ice does not fall outside of the glass.
NOTE: When changing from crushed to cubed, a few ounces of
crushed ice will be dispensed along with the first cubes.
The Dispenser Drip Tray
There is an insert in the dispenser drip tray. The insert can be
removed from the drip tray to carry to the sink to empty or clean.
Push down on the rear edge of the insert to tilt up the front
edge for easy removal.
The Dispenser Light
When you use the dispenser, the light will automatically turn on.
To turn on the light when you are not dispensing:
Press LIGHT to toggle through the following choices in a
continuous loop:
OFF (default): The dispenser light is off.
ON: The dispenser light is on at 100% brightness
DIM: The dispenser light is on at 50% brightness
The dispenser lights are LEDs that cannot be changed. If it
appears that your dispenser lights are not working, see
“Troubleshooting” for more information.
The Dispenser Lock
The dispenser can be disabled for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the
refrigerator, to the ice maker, or to the dispenser light. It simply
deactivates the controls and dispenser levers. To turn off the ice
maker, see “Ice Maker and Storage Bin.”
Press and hold LOCK for 3 seconds to lock the dispenser.
Press and hold LOCK for 3 seconds to unlock the dispenser.
The display screen indicates when the dispenser is locked.
Cut Hazard
Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.
A.Dispenser tray insert