Filter
Top Products
25
Setting the clock
NOTE: If an oven function is active or
programmed, you cannot change the clock.
1. Press CLOCK SET/START.
2. Set time.
3. Start clock.
If time has not been entered correctly,
3 short tones will sound and “Err”
will be displayed. The display will show
the closest valid time. Repeat Steps 2
and 3 to re-enter the time of day.
NOTE: You can clear the time of day
from the display by opening the door
then pressing and holding CLOCK
SET/START for 5 seconds. Repeat to
see time of day on display again.
PRESS YOU SEE
HR MIN MIN SEC
PRESS YOU SEE
3
3
0
MIN SEC
Using and Caring for Your Oven
continued on next page
PRESS YOU SEE
START
MIN SEC
9753312Av13c80 12/4/98 3:39 PM Page 25